Strictly follow the maintenance requirements and clean the engine or oil pan according to the following methods before installing the supercharger to increase the service life of the supercharger
Method 1:
• Remove the damaged supercharger
• Add a certain amount of mixed oil (30% engine oil + 70% diesel)
• Insert the supercharger oil inlet pipe into the oil return pipe or seal the outlet of the oil inlet pipe
• Start the engine, drive at idle speed for 1-2 minutes, and drain the mixed oil (if the oil is dirty, it is best to clean it twice). The above work should be done when the engine is hot
• Clean or replace the supercharger oil inlet pipe, clean the oil pan, and remove the oil filter and air filter
• Install a new supercharger, and add engine oil to the supercharger oil inlet pipe for pre-lubrication before installing the oil pipe, install a new filter and fill the filter with engine oil, and install other pipes
• Start the engine, idle for 3 minutes and speed up to see if there is any leakage
Method 2:
• Drain the diesel engine oil;
• Remove the oil pan and clean it, then install it;
• Remove the supercharger oil inlet pipe, remove the oil stains and impurities in the pipe, clean the inner wall, and then install it on the engine;
• Add new engine oil of the brand specified by the engine manufacturer; replace the new oil filter that meets the requirements of the engine manufacturer;
• Do not install the supercharger first, connect the supercharger oil inlet pipe to the return pipe, start the engine, and run it at idle for 3 minutes.
After completing the above steps (method 1 or method 2), install the supercharger. As long as this is done, the service life of the supercharger can be greatly improved!